{"product_id":"zebra-usb-cable-series-a-7-ft-straight-for-ls2208-and-ds-series-corded-scanners-cba-u01-s07zar","title":"Zebra USB Cable Series A 7 ft Straight for LS2208 and DS Series Corded Scanners CBA-U01-S07ZAR","description":"\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Zebra USB Series A cable, 7 ft (2.1 m), straight - not coiled.\u003c\/li\u003e\n\u003cli\u003eThe exact cable Zebra bundles in the LS2208 USB kits, so it is a like-for-like replacement.\u003c\/li\u003e\n\u003cli\u003eCarries both data and the 4.5 to 5.5 V DC host power a Zebra corded scanner draws.\u003c\/li\u003e\n\u003cli\u003eUSB Type A male at the host; modular RJ-style plug into the scanner handle base.\u003c\/li\u003e\n\u003cli\u003eSets the scanner to USB: on Zebra corded scanners the cable determines the active interface.\u003c\/li\u003e\n\u003cli\u003eZebra-confirmed for the LS2208, DS9908 and DS9908-R; widely used across the corded LS and DS range.\u003c\/li\u003e\n\u003cli\u003eUser-replaceable at the scanner end, so a damaged cable does not retire a working scanner.\u003c\/li\u003e\n\u003cli\u003eNo power supply required or included - the host USB port powers the scanner through this cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eZebra Description:\u003c\/strong\u003e USB Cable: Series A Connector, 7 ft. Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 7 ft \/ 2.1 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeometry:\u003c\/strong\u003e Straight. The genuine Zebra part is not coiled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e Non-shielded. The shielded equivalent is CBA-U46-S07ZAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHost Connector:\u003c\/strong\u003e USB Type A male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScanner Connector:\u003c\/strong\u003e Modular RJ-style plug seating in the scanner handle base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Bus powered; carries 4.5 to 5.5 V DC host power alongside data\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZebra-Confirmed Scanners:\u003c\/strong\u003e LS2208, DS9908, DS9908-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the Box:\u003c\/strong\u003e One cable. This is an accessory, not a scanner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat This Is\u003c\/h3\u003e\n\u003cp\u003eCBA-U01-S07ZAR is a cable, not a scanner. It is Zebra's 7 foot straight USB Series A interface cable, and it is the exact part Zebra bundles inside the LS2208 USB kits, which makes it the correct like-for-like replacement when a cable is damaged, lost, or simply too short for a new bench layout. USB Type A plugs into the host at one end; a modular RJ-style plug seats in the base of the scanner handle at the other. It carries the scanner's data and its 4.5 to 5.5 V DC power over the same run, which is why no separate power supply appears anywhere in a Zebra corded USB installation.\u003c\/p\u003e\n\u003ch3\u003eStraight, Not Coiled\u003c\/h3\u003e\n\u003cp\u003eZebra's own description string for this part reads 'USB Cable: Series A Connector, 7 ft. Straight'. That is worth stating plainly because aftermarket coiled cables are marketed under this part number by third-party sellers, and a coiled cable behaves differently on a counter: it retracts, it pulls back against the operator, and it will not lie flat along a cable run. If a coiled cable is what the bench needs, order one deliberately rather than expecting it here. This part is also non-shielded; the shielded equivalent is CBA-U46-S07ZAR.\u003c\/p\u003e\n\u003ch3\u003eCable Sets the Interface\u003c\/h3\u003e\n\u003cp\u003eOn Zebra corded scanners the cable is not an accessory in the ordinary sense - it decides what the scanner is. The same LS2208 body presents as USB, RS-232, Keyboard Wedge or IBM 46XX depending entirely on which cable is fitted. Ordering this part converts a scanner-only part number into a working USB scanner, or converts a serial installation to USB. It also means the reverse: fitting this cable to a scanner configured for another interface will require reconfiguring the scanner, which Zebra's 123Scan utility handles by barcode or over the USB link.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eZebra's own documentation confirms this cable for the LS2208 and for the DS9908 and DS9908-R. It is catalogued far more widely than that across the Symbol and Zebra corded handheld range, including the LS1203, LS4208, LS4278, DS2208, DS4308 and others, but those associations come from distributor catalogues rather than from a Zebra compatibility table, so check the scanner's own accessory guide before ordering for a model outside the three Zebra names. Related Zebra parts worth knowing: CBA-U10-S15ZAR is the 15 ft straight version, and CBA-U21-S07ZBR is the shielded 7 ft cable used with the DS2278 and DS8178 cradles.\u003c\/p\u003e\n\u003cp\u003eFor anyone replacing a damaged scanner cable, converting a scanner-only part number into a working USB station, or keeping a spare on the shelf, the Zebra CBA-U01-S07ZAR is the genuine part. Contact us to learn more or secure this solution for your business today.\u003c\/p\u003e","brand":"Barcode Printer Shop","offers":[{"title":"Default Title","offer_id":53067037802816,"sku":"CBA-U01-S07ZAR","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/6733\/3952\/files\/zebra-7-foot-usb-cable-series-connector-non-shielded-cba-u01-s07zar.jpg?v=1787668704","url":"https:\/\/pos4nerds.com\/products\/zebra-usb-cable-series-a-7-ft-straight-for-ls2208-and-ds-series-corded-scanners-cba-u01-s07zar","provider":"POS Nerds","version":"1.0","type":"link"}